DIGITAL CUTTER
ZKC-25 (Shear blade type)
ZKC-25C (Shear blade, PLC control)
ZKC-25T(Thin blade type)
ZKC-25CT (Thin blade, PLC control) |
|

|


1. Wide range of cutting material |
2. Exchange of blade type is possible |
3. Cutting length correcting function |
4. Not requires much space for installation |
|

ZKC-25 / ZKC-25C |
ZKC-25T / ZKC-25CT |
Glass cloth tube
Insulated wire
Tin coated wire
Teflon tube
Silicon tube
Tape solder
Insulation sheet
Laminating sheet
Film, etc. |
Vinyl tube
Rubber tube
Insulated wire
Optical fiber cable (Plastic fiber)
Tape solder
Teflon tube
Silicon tube
Plastic, etc |
|


・Roller (upper) : ZRU25-U |
・Roller (lower) : ZRS25-U |
・Cutter blade : ZHU25
・Fixed blade : ZHS25
・Thin blade : ZHT25 (10 pcs/set)
・Blade receiver : ZHM25 (10 pcs/set)
・Thin blade holder : ZUT25* |
*ZUT25 is necessary for changing blade type from shear blade to thin blade.
|
Blade Types |
Shear blade type
Durable and best for cutting soft metals like aluminum, copper, etc. Also good for glass fibermixed material. Blades can be grinded and sharpened when blades become blunt.
|
Thin blade type
Sharp cutting makes flat and smooth cutting surface. Best for tubes, etc.Blade is disposal and can be replaced by new blade (HT25A) when blade becomes blunt.
|
|


Model |
ZKC-25 / 25T / 25C / 25CT |
Material feeding speed |
[mm/s] |
|
100~600 |
Cutting length |
0.1~99999.9 |
Number of cutting operation |
1~999999 |
Repeatable cutting accuracy*1 |
±0.2 |
Maximum width of cutting material |
100 |
Maximum thickness of cutting material |
20 |
Cutting force (0.5 mm above blade |
1.28 kN (128 kgf) *2 |
External input / output terminal |
-25C, -25CT : equipped
-25, -25T : not equipped |
Processing ability |
Length 10 mm : 120 pcs/min
Length 100 mm : 78 pcs/min
Length 1000 mm : 23 pcs/min |
Power source |
AC100V, 50/60Hz, 1A |
Dimensions*3 |
W390 / D330 / H330 |
Weight |
30kg |
*1 Value measured with the material for our test method.
*2 Value calculated from motor output.
*3 Attention: Some cannot be cut depending on its material and shape.
|


|