MK Electronics Ltd.
Japanese site
Site Map
Privacy Policy
Company info MK News Products information Request of catalogues and documents Support Inquiry



Products information
 
  MKS725S
MKS504S
MKS100L
MKS50X
MKS630V
MKHT630
ROTALY ADAPTOR
MGS series

  ZKC-325/325T/325C/325CT
ZKC-200/200C
ZKC-25/25T/25C/25CT
ZKC-325W/325WT
ZKC-325H
ZKC-25T-W1
ZKC-25ENL
ZKC-25M/MT
ZKC-325V/VT/VF/VFT
ZKC-325VFT-004/
ZKC325COTG1

ZKC-25S/ST
ZKC-16/16T/16A/16AT
ZKF-25
ZKF-30
ZKF-51N/ZFR-51N
ZSE-25/25H
ZKR-20
ZKC Series Specification

  HK-005
DR series
MS300/MS600
DS-001B/Y
DRUM ROLLER
ZKR-1316

  ITS-10HS
ZKS-12
CS60
US2015
US2300
RS2400

  ZKS-100

  MASTER ACE
HPS-3S/13S/13S-TB

  ITH-15S
MKVH-50

  Measurment equipment of
coil winding DMT-108
  Measurment equipment of toroidal coil winding DMT-208
  ABISOFIX
  ISOREX
  PORTABLE FIX MHP30/MHP35P
  FINOFIX
  Insert type Stripper M27G
  TWIN CONE STRIPPER M88G
  Twin wheel Stripper M14BJ
  HAND WIRE STRIPPER MKWSN

  Air cushioning material making machine PACO140

MK News

Request of catalogues and documents
 
Inquiry by E-mail
 

Hand Cable Stripper
MKHT630

SUITABLE FOR WIRING IN A SMALLELECTRIC BOX STRIPPER FOR SINGLE OR MULTIPLE CORE WIRES.

PATENT RESISTERED No. 3122430

IV, Eco-IV, Shielded wire STRIPPABlE.




Easy wiring in arrow space.
Safety - Stripping blade is not eaposured.
Easy stripping insert a wire and ratatethe stripper - that's all.
Adjustable stripping length only to set a stopper to required length.
No scattering of Stripped refuses cutting it as spiral.
Endless stripping by removing thestopperEasy.




A special unit, MKHT630 for
above Φ30 wires is available.
● IV (8~325mm ) ● Eco-IV ● CV , CVT ● Eco-CV , Eco-CVT
● Captire ● VCT ● Rubber* ● WL1 , WL2* ● Shield Wire
● Cable with separator ● KIP* ● Other Cables of Φ6.0~30.0
*Depending on Hardness, Thikness and Supplier.



・Furukawa Co.Ltd.
・Sumitomo Electric Industry, Co.Ltd.
・Hitachi Cable Co.,Ltd.
・MitsubishiCable Co.,Ltd.
・Sanwa Cable Co.,Ltd.



[1]Choice of Bush
Bush-option- is provided in every Φ0.2 from Φ6.0~Φ30.0, avalable in stock.
Choose suitable Bush, not too lose or too tight.
[2]Mount of Bush
Check direction of Bush, to insert it to the unit and close Cap.
[3]Adjustment of the tip of Blade
By using the attached arren-wrench, set up the tip of Brade in position of about half of thickness of Shease and not to touch the core wire.
[4]Stripping
After setting the stopper at required stripping length, push and rotate the unit around the wire. When the end of wire reched the stopper, rotate the unit in 180° and cut off the shease.







Return to the top of page

Copyright © MK Electronics Ltd. All Rights Reserved.